EMOTIVA EPM-300 Amplifier Module

Model: EPM-300 Mod
Year: NA
Price: NA
Class: H
Channels: 1
Power 8 Ohm All Channels Driven: 200W
Power 4 Ohm All Channels Driven: 300W(400W2Ohm)
Power Bandwidth: +/-0.1dB
Frequency Response: 10Hz-100kHz(-3dB)
THD: <.015%
SN Ratio 1W: NA
SN Ratio Full: >100
Damping: >300
Crosstalk: >120
TransformerVA: 350/ch
Capacitance: 48,000
Input Sensitivity: NA
Input Impedance Unbal/Bal: NA
Gain: NA
Adjustable Gain: No
Power Requirements: NA
Connections: XLR/RCA
Trigger: NA
LED Meters: NA
2 Ohm Capable: Yes
Output Devices: NA
Fans: NA
Weight: NA
Width: NA
Height: NA
Depth: NA
Rack Size: NA
Topology: Monoblock module for MPS

The Emotiva EPM-300 is a monoblock module for the MPS-1 and MPS-2 multichannel amplifiers. It has it's own power supply... a massive toroidal transformer and is of Class H design Topology; it delivers 200 Watts / 8 Ohms, 300 Watts / 4 Ohms and 400W / 2 Ohms.
the PCB boards of the amplifier modules revealed doubled sided, plate through, glass epoxy, FR4 PCBs used throughout with 2 ounce poured copper on all power sections and ground planes.
On the back, the module sports RCA gold-platted and XLR ballanced inputs, as well as a 12 V trigger connector.

  • Independent 350VA, low noise toroid power transformers w/ high speed rectifiers and 48,000uF of storage
  • High efficiency Class H power amplifier design, minimizes power losses and allows cool operation
  • Complementary, discrete power amplifier design incorporating high current, high speed, Toshiba power devices
  • Truly transparent, integrated soft clip circuitry
  • Balanced XLR and RCA inputs
  • THD less than .015%, 20Hz-20kHz with 80kHz measurement bandwidth
  • Completely Stable into 2 ohm loads
  • Fully protected from all fault conditions with ultra quiet, module mounted
  • Fan assisted cooling for severe duty cycle applications
  • Soft start circuitry. Silent turn on/off - No audible transients
  • Signal sensing auto turn on or remote trigger
  • All aluminum capacitors are premium quality, low ESR, 105°C rated for high reliability and performance
  • Doubled sided, plate through, glass epoxy, FR4 PCB's used throughout with 2 ounce poured copper on all power sections and ground planes
  • IEC power inlet, 120/230 VAC user configurable